Síntese e caracterização do Tantalato de Cério
Loading...
Date
Advisor(s)
Co-advisor(s)
Committee members
Santos, Leandro de Arruda
Paula, Marcos Marques da Silva
Paula, Marcos Marques da Silva
Graduate program
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal do Amazonas
Type
Access rights
DOI
Resumo (Portuguese)
A produção e caracterização estrutural, ótica e térmica do tantalato de cério (CeTaO4) é investigada nesta dissertação usando as técnicas de moagem mecânica (MM), difração de raio X (DRX), calorimetria diferencial de varredura (DSC), tratamento térmico (TT), fluorescência de raios x (FRX) e espectroscopia de UV-Visível (Uv-Vis). Os precursores Tântalo (Ta) e Óxido de Cério (CeO2) em forma de pó são moídos por oito horas utilizando um moinho de alta energia. A cada duas horas de moagem, foi feita a caracterização por DRX. Além das duas fases precursoras Ta e CeO2, foi identificada uma fase nova, Ce2O3. O FRX identificou os elementos precursores e aproximadamente 1,5% de Ferro (Fe), elemento originado do material do jarro de moagem. A análise de DSC mostra que o comportamento geral da amostra é exotérmico. As temperaturas determinadas a partir do DSC para o TT foram: 500°C,750°C, 850°C e 1000°C. Foi usado um patamar de uma hora para todos os tratamentos. Estruturas de tantalatos foram identificadas através do DRX após o TT. Em 500°C, a fase CeTaO4 nanoestruturada é sugerida e em 1000°C as fases existentes são CeTa3O9, FeTaO4 e CeO2. Através da espectroscopia de Uv-Vis as amostras após o TT em 500°C e 1000°C apresentam o gap igual a 0eV e após o TT a 750°C e 850°C com o gap de 3.2eV e 2.2eV respectivamente.
Abstract
The production, structural, optical and thermal characterization of Cerium Tantalate (CeTaO4) is inquired in this dissertation through Mechanical Milling (MM), X-Ray Diffraction (DRX), Differential Scanning Calorimetry (DSC), Heat Treatment (HT), Fluorescence X-Ray (FRX) and UV-Visible Spectroscopy (UV-Vis). The precursors Tantalum (Ta) and Cerium Oxide (CeO2) in powder form were ground for eight hours using a high-energy mil and every two hours of grinding, the characterization was made by XRD. In addition to the two precursor phases Ta and CeO2, a new phase, Ce2O3, was identified. The FRX identified (in addition to the precursor elements) approximately 1.5% of Iron (Fe), an element from the jar's feedstock through Mechanical Milling. An analysis of the DSC showed that the general behavior of the sample is exothermic. The temperatures determined from the DSC to the HT were: 500°C, 850°C and 1000°C. A one-hour threshold was used for all treatments. Tantalate structures were identified through the XRD after HT. In 500°C, the nanostructured CeTaO4 phase was suggested and in 1000°C the existing phases were CeTa3O9, FeTaO4 and CeO2. Through Uv-Vis spectroscopy, the samples, after HT in 500°C and 1000°C, showed a gap equal to 0 eV and after the same process at 750°C and 850°C, a gap of 3.2 eV and 2.2 eV, respectively.
Description
Keywords
Controlled term
Raios X - Difração; Calorimetria diferencial de varredura; Fluorescência de raios x; Tratamento térmico; Espectroscopia de UV-visível
Sustainable Development Goals (SDG)
Citation
BERNARDINO, Roberta Lorena Dos Santos. Síntese e caracterização do Tantalato de Cério. 2020. 49 f. Dissertação (Mestrado em Física) - Universidade Federal do Amazonas, Manaus, 2020.
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as Acesso Aberto

